10 Best Ram & Silverado Leveling Kit Review and Complete Guide
Over time, trucks can get a little uneven. If you’re like me and like the details, then I’m sure you hate uneven balance and minimal ground clearance just as much as the other guy. Luckily enough, there’s a solution for that.
Leveling kits are the best thing that has happened to trucks in a very long time. Not only do they allow you to level your vehicle, they also increase the ground clearance and increase the overall aesthetics.
If you are in a hurry, you can quick pick the best one from the following list:
- Rough Country Lift Kit for 2014-2019 RAM Truck
- MotoFab Lifts CH-3F-2R Leveling Kit with 2007-2018 Chevy Silverado
- Rough Country Leveling Kit for 2014-2020 Ram Truck 2500 3500 4WD
- Front Leveling Lift Kit by StreetDirtTrack Fits 2014-2020 Dodge Ram
- Supreme Suspensions – Full Lift Kit for Chevy Silverado 1500HD 2500HD 3500HD
- Supreme Suspensions – Front Leveling Kit for Ram 2500 3500 4WD
- TORCH Lift Leveling Kit For Chevy GMC Sierra Silverado
- Dynofit Torsion Keys with Shock Extenders for 2011-19 Chevy(chevrolet)
- Steel Front Lift Spacers by StreetDirtTrack Fits Dodge Ram 1500 2500 3500
- Leveling kit by RockTrix for Dodge Ram 1500, 2500, 3500
Best leveling kit for Silverado and RAM
If you’re looking for the best leveling kit out there, then you’re in for a ride. Choosing the right model for yourself, with all the variables involved, can be a daunting process. And since it’s your vehicle, you don’t want to risk it, right?
Worry not, for in this segment, I’ve compiled the top ten leveling kits available for the Silverado and RAM.
Shortly below, I’ve compiled a table for you with the main details highlighted. Let’s get going!
Comparison table of Best leveling kit
Our 10 Picks of best leveling kit for Silverado and RAM
Just below, I have briefly reviewed all of the products mentioned in the comparison table above. To further facilitate you and give a well-rounded perspective, I’ve also mentioned a few pros and cons when necessary.
Without further ado, here are my 10 Picks of best leveling kit for Silverado and RAM!
1. Rough Country Lift Kit
The Rough Country Lift Kit is my premium recommendation if you’re looking for the best ram 2500 leveling kit. With features such as laser precision engineering and aesthetics, here’s what you should anticipate.

To start off, the main reason I strongly advocate for this product is because of its performance. This model is an elegant mixture of three features, which includes the protection it provides, its style, and it’s unparalleled performance.
On top of that, the Rough Country Lift Kit also includes a premium N3 shock absorb kit, which will make your ram 2500 optimally suited for outdoor and off-road activities.
The installation procedure is also quite easy and doesn’t really require any sort of technical expertise. To make the most out of what you have, I would recommend that you go over the instruction manual that comes in the package.
If that doesn’t help, there are several YouTube references that you can refer to for the best results.
Last but not least, the Rough Country Lift Kit is famous for maintaining the factory ride quality. If you’re nostalgic and want to relive those glory days of getting a new vehicle, then this is the model that will definitely help you get there.
Since this model is our first feature, I’m pleased to say that there are no downsides with this model. If you choose to go with the Rough Country Lift Kit, then you’re definitely in for a surprise.
- Easy bolt-on installation
- Maintains factory ride quality
- Includes (2) Premium N2.0 Shock Absorbers
- Elegant and aesthetical appearance
- A bit overpriced
Bottom-line
I recommend the Rough Country Lift Kit for all types of users out there who are looking for something reliable and smart to level their ram 2500.
2. MotoFab Lifts CH-3F-2R Leveling Kit
The MotoFab Lifts CH-3F-2R is my follow-up recommendation and has all the features of its predecessors. Here’s what’s new to the list!
Unlike other kits, what sets this model apart is its user-friendly operation method. The installation procedure is arguably as easy as it gets.

With a time-frame of an hour or an hour and a half, you’ll be done with the job. Furthermore, the fact that it doesn’t require and strut or coil disassembly is also a major plus point.
The next great thing about this model is its design and appearance. Frankly put, these lifts aren’t really visible from the outside. However, if you’re like me and pay attention to the details, then I’m sure you’ll like how the MotoFab Lifts CH-3F-2R is designed.
Building onto that, the pair is CNC machined out of billet aluminium and then powder coated. The last process ensures that the model matches your factory suspension, a great feature to look into.
However, it’s important to note that the MotoFab Lifts CH-3F-2R is suitable for a limited variety of vehicles. If you own a 2007-2018 Chevrolet or a GM 1500 pickup, then you’re in luck.
I wouldn’t really advocate modifications or tweaks to make this model work. If you don’t have the vehicle mentioned above, then there are other follow-up products that you can consider.
There are, nonetheless, a minor downside. As I highlighted above, the installation process is quite easy. However, that doesn’t mean it should be taken as such.
If you don’t pay attention to detail during the process and even get one thing wrong, you’ll be in for a very harsh ride.
- CNC machined construction
- Powder-coated rear lift blocks
- Durable and sturdy
- No strut/coil disassembly required for installation
- Not suitable for all vehicle types
- Uncomfortable ride if installed incorrectly
Bottom-line
Arguably the best leveling kit for Silverado 2500HD, I recommend this model to all types of users out there who have the particular vehicle type!
3. Rough Country Leveling Kit for 2014-2020 Ram Truck 2500 3500 4WD
Next up, I present to you the second edition of Rough Country. Pioneers in automobile interchangeable parts, this manufacturer always lives up to their name.
The main feature of the Rough Country Leveling Kit is its performance, protection, and aesthetics.

With premium N3 shock absorbers, there is nothing that this model can’t handle or protect you from. Coupled with its design, the Rough Country Leveling Kit is best for off-road adventures!
Another great thing about this model is the easy and simplistic installation method. You don’t need to be well-versed in truck anatomy to get the job done; just follow the manual step-by-step, and you’re good to go.
This model is arguably the best riding lift kit for dodge ram 2500. However, that also means it isn’t that suitable for other vehicles. If you’re the proud and lucky owner of one, then you’re in good luck.
There is, nonetheless, one major downside to this model. Not necessarily with the model itself, but one of the accessories that come with it: the instructions.
If you’re a novice and don’t have much experience working with leveling kits, then you might have a little trouble with keeping up. In that case, I would recommend looking for YouTube instructions that can help you get the job done.
- Maintains smooth factory ride
- Shock absorbers aid durability
- Durable spring spacers make the ride comfortable
- Bolt-on installation
- Instruction manual isn’t helpful
Bottom-line
If you’re the proud owner of a dodge ram 2500, then this model is the best pick of the bunch. You should definitely go for it!
4. Front Leveling Lift Kit by StreetDirtTrack
The Front Leveling Lift Kit by StreetDirtTrack has main features such as shock extension brackets and front lift spacers. If you chose this model, here’s what else you should anticipate!
For starters, this model is vehicle specific. If you a dodge Ram 2500 4WD modeled between 2014 and 2020, then you’re in the right spot.

Along with the main features which ensure a comfortable ride and overall experience, the installation process of the Front Leveling Lift Kit by StreetDirtTrack is also revolutionary.
This process is laid out, especially for beginners and DIY enthusiasts. The manual that comes with the package is as elaborative as it gets and will help you sort out the process easily.
What’s even better is that you won’t need any type of cutting or welding to get the job done. Basic hand tools are all that are required for this.
There aren’t any apparent downsides or de-merits to this model. However, there is one thing I would like to point out earlier on.
The leveling of this model is not glossed black. Due to that (it’s flat black appearance), this kit is susceptible to rust or any other type of moisture-based damage.
Hence, it’s of utmost importance that you keep up with its maintenance and do routine check-ups from time to time. Other than that, you’re good to go!
- Bolt-On Kit Installs with basic hand tools
- Comes with Heavy Duty Carbon Steel Shock Extenders
- Precision Laser Cut and Machine Welded for a perfect fit
- Rigorously tested off the road to assure safety
- Flat black finish susceptible to rust
Bottom-line
The Front Leveling Lift Kit by StreetDirtTrack is recommended for all types of users out there, especially those who are looking for an easy-to-install model that doesn’t require any type of expertise.
5. Supreme Suspensions – Full Lift Kit
The Supreme Suspensions – Full Lift Kit is a game-changer and brings something new to the table: adjustable lift.
The main feature of this model, mentioned above, is what sets it a class apart. Now, you can easily work with variable height adjustments in a single model, which will marginally reduce your need to get something specialized.

Other notable features about this model are its easy installation and technical notes that come with it to make the job easier. The bolt-on process won’t take much of your time.
However, if you’re planning to alter the factory height of your vehicle, I would personally recommend that you get an alignment done by a professional.
Now that we’ve addressed the basics, here are a few reasons why choosing this model might make a difference for you.
The Supreme Suspensions – Full Lift Kit carries many benefits that will enhance your overall opinion. Along with ground clearance, which is the main agenda, this model also looks good and will help you to improve the overall appearance of your vehicle.
If you want a make-over and can’t decide on what model to work with, then I’d suggest the Supreme Suspensions – Full Lift Kit due to its versatility.
There aren’t any downsides or disadvantages to this model that I feel would be a differential. Just install it properly and thoroughly, and you’re good to go!
- Maintain factory ride quality
- Improve the look of your vehicle
- Machine precision dimensions for custom fit
- Comes packed with all the relevant accessories
- Not for all types of uses
Bottom-line
I recommend the Supreme Suspensions – Full Lift Kit to users who are looking for a DIY model that can be the ultimate answer to their leveling kit needs.
6. Supreme Suspensions – Front Leveling Kit for Ram 2500 3500 4WD
If you’re looking for something strong, sturdy, and primarily front-wheel based, then the Supreme Suspensions – Front Leveling Kit for Ram 2500 3500 4WD is your best pick. Here’s what you should look forward to!
Supreme Suspensions are notable for their installation procedures, which are reputed to be awfully easy to follow through with. This statement cannot be any truer.

With this model, the bolt-on installation, which requires no special tool, makes this model optimal for people who are just starting out and need something basic to work with.
However, don’t let the basic bit fool you.
Along with improving your overall look and increasing ground clearance, the Supreme Suspension is also quite versatile and comes packed with all the relevant hardware required to get the job done with ease.
Another great thing about this model is that you can also reuse factory shocks. Normally, this isn’t advised and can change the ride experience, not for the better.
However, with the Supreme Suspensions, you won’t have to worry about that; complete ride quality is maintained.
Last but not least, I would like to bring attention to their instruction manual. The main downside is that it isn’t that elaborative, and the reason I mentioned that the process is easy to follow through is if you have a general idea of what you’re doing.
For optimal installation experience, I would highly recommend that you look up tutorials online that deal with the same model.
Other than that, the Supreme Suspensions – Front Leveling Kit for Ram 2500 3500 4WD is as good as it gets!
Note: this model is for front-wheel operation only.
- Easy bolt-on installation
- Increases ground clearance
- Contributes to the overall aesthetics of the vehicle
- Not for rear wheels
- Instruction manual isn’t thorough
Bottom-line
I recommend this model primarily to users who are looking for something low-maintenance and easy to work with.
7. TORCH Lift Leveling Kit
The TORCH Lift Leveling Kit is suitable for the 2001-2010 Chevy Silverado GMC Sierra 2500 3500 HD. If you’re a proud owner, then keep on reading!
The first thing I’d like to address is the contents of this package. Coming equipped with all the relevant hardware, you won’t have to make a second trip when following through with this model’s installation.

Furthermore, the kit is bolt-on and won’t require any special tools to get the job done. If you’re like me and enjoy the DIY journey, then you’re definitely in for a ride.
Now, moving on to the specifics.
I would like to highlight that this model, unlike others, includes a few things that you might not need completely or aren’t visible.
For complete functionality of them, and to ensure that your vehicle gives the performance, I would advocate for routine maintenance checks.
It won’t take much of your time, but I will let you know of any issues well before their time.
There aren’t any obvious or blatant downsides that I feel are present with the TORCH Lift Leveling Kit. However, there’s one thing I’d want you to anticipate.
Once installed, the model has a little bit of a stiff ride in the beginning. However, it will ease out as time passes. It’s a rite of passage, a process that needs to be trusted.
- Manual has step-by-step instructions
- Bolt-on installation kit requires no modifications/welding
- Lightweight/easy to travel with
- Suitable for traveling
- Ride is initially stiff
Bottom-line
The TORCH Lift Leveling Kit is the best leveling kit for Silverado 2500HD. Hence, if you’re a proud owner and are looking for something reliable, then this is it.
8. Dynofit Torsion Keys with Shock Extenders
The main features of the dynofit Torsion Keys with Shock Extenders are its adjustable height, material, and installation procedure.
Starting with the first, the adjustable heights are a great feature of this model. Along with making the model quite versatile, it’s also a good thing to have around if you can’t decide on the height adjustment for your vehicle.

Along with functionality, another thing about this model that deserves a shout out is the quality of its frame.
Forged from hard steel, the dynofit Torsion Keys with Shock Extenders is as durable as it gets. Specifically engineered to handle high temperatures, you won’t have to worry about harsh climates rendering your kit useless.
The installation process is also quite easy to follow through with, especially since the mechanism is bolt-on. However, for proper set-up, I would highly recommend an alignment.
For that, it’s best to see a professional who can get the job done with ease. I know, it’s extra money. But in the end, the result and performance will definitely be worth it.
There are no downsides or de-merits to the dynofit Torsion Keys with Shock Extenders, whatsoever. If you chose to go with this model, I could assure you that you won’t be disappointed with the performance.
Note: maintenance, like always, is essential. Visiting the mechanic from time to time, or doing it yourself, will help ensure longevity.
- Bolt-on installation
- Very durable and sturdy
- Adjustable height adjustment
- Shock extenders enable factory shock operation
- None
Bottom-line
I recommend the dynofit Torsion Keys with Shock Extenders to Chevy owners, especially those with models from 2011-2019.
9. Steel Front Lift Spacers by StreetDirtTrack
If you’re old-school and have a Dodge Ram modeled anytime around 1994, then the Steel Front Lift Spacers by StreetDirtTrack is exactly what you need to bring it back to style.
With its elegant appearance and smart hardware, this model will be the perfect fit to style up your vehicle and give it a new look that it needs!

The installation process is quite easy to keep up with and doesn’t require any technical finesse. I found the manual to be quite helpful since it took me through the process step by step.
What also helps is that there isn’t any sort of cutting or welding required to get the perfect fit, which is why I’m pretty sure that anyone can get it done in their garage!
To be frank, there aren’t any downsides or features about this model that I found to be bothersome or undesirable.
After experimenting with its predecessor on this list, I found this model to be virtually the same without any major or minor differences.
However, in both cases, I would again strongly emphasize on ensuring that you follow through completely with the installation. Don’t try to adjust any short-cuts or hacks, because that might have a detrimental effect down the road.
Last but not least, if you feel that the performance dips, you’re already late for the checkup.
- Perfect for the DIY enthusiast
- Caters to older vehicles as well
- Easy to store/transport/lightweight
- Engineered to withstand any conditions on and off the road
- None
Bottom-line
If you’re looking for something to bring that 1994 Dodge Ram 2500 4WD back to life and onto the streets, then the Steel Front Lift Spacers by StreetDirtTrack will help you get there. Go for it!
Read Also: 10 Top Brake Line Bender Review & Buyer Guide
10. Leveling kit by RockTrix
I present to you the last model on this list, the Levelling kit by RockTrix. Before we begin, I would like to assure you that it’s placement has nothing to do with its performance, etc.

The Levelling kit by RockTrix is equally as good as the other models on this list. Here’s what you should anticipate!
For starters, the versatility and range of vehicles this model is compatible with is pretty astounding. Though primarily old, the range of vehicles means that there’s a decent chance you can use this model to bring your truck back to life.
Another great feature of this model is its sturdy buildup. Manufactured from heat-treated carbon steel, the Levelling kit by RockTrix is engineered to perfection, an attribute owed to its due to its precise fit and measurement.
On top of that, I would also like to mention that the solid exterior is optimal for heavy-duty operation and can withstand extreme temperatures.
Now, let’s move onto the installation.
Since this model doesn’t come installation instructions, it’s a good idea to get a professional do the job.
Furthermore, I would also suggest that you use Loctite to protect your threads.
This will keep them free from any type of rust or corrosion, and will also prevent them from loosening from vibrations.
As far as downsides are concerned, there aren’t any that are a major downside, aside from the no-manual bit.
- Machined to exact specifications for optimal durability and fitment
- Helps to accommodate larger diameter tires
- Services a versatile range of vehicles
- No shock absorbers, cutting, or welding during installation
- No installation instructions
Bottom-line
If you already planned to get your kit installed professionally and couldn’t decide on which model, then the Leveling kit by RockTrix should be your first option!
Things to consider when buying best leveling kit
When choosing the right model for yourself, it’s important to keep a few things in mind. Here are my top recommendations!
Credibility of manufacturer
If you get a kit made of weak components or illegitimate parts, then it will do more bad for your vehicle than good.
Since all kits are made of solid steel, this factor trickles down to how credible the manufacturer or the seller is. Do your research before proceeding.
Lift height
The lift height refers to how high you can adjust your vehicle. This depends on your preference and how dipped your vehicle’s trunk is.
Vehicle type
Not all levelling kits are made the same. Some are designed keeping a particular vehicle model in mind.
If you’ve got a Chevy or something that is more mainstream in popular culture, then you’ll be fine. However, if you’ve got something old-school or not that prevalent, then you’ll need to look for a particular model suited for your vehicle.
Adjustability
Some levelling kits are operational on a continuous range of heights. If you’re not sure of the measurements and don’t want to risk it, then it’s a good idea to look into this feature.
However, this is entirely optional and depends on you.
Read Also: 10 Best Mirrors for Jeep with Doors Off Review
Frequently Asked Questions (FAQs)
Asking the right questions is the best way to learn more. Down below, I’ve compiled the most frequently asked questions when it comes to levelling kits.
Are levelling kits bad?
No, levelling kits are not bad. However, the main thing to take note of is quality. If a levelling kit is made of poor quality, then it will definitely be bad for your vehicle. If not, then a levelling kit is a great addition!
Why do I need a levelling kit for my truck?
Generally speaking, trucks are built to withstand a maximal load capacity. To counter the weight and the balance, a levelling kit will bring the front of the truck up and make it even with the back, so that the base is completely horizontal.
What is better, a levelling kit or a lift kit?
Both have their own pros and cons. If you’re planning to lift only the front, then the former is the best choice. If you’re planning to go higher than stock, then the latter is a good option.
Does a levelling kit affect gas mileage?
Yes. By increasing the frontal surface, the drag is significantly increased. Hence, you’ll get less mileage than before.
Do levelling kits affect towing?
No, a levelling kit will not affect towing. The two process are independent and don’t overlap when it comes to functionality.
Do 2 inch levelling kits require new shocks?
Not necessarily. You can make do just fine by reusing the same shocks.
Why are pickup trucks higher in the back?
This is because when you load up weight on the back, the truck doesn’t fall too low or sag. These two occurrences can often cause handling and towing problem, which is why trucks are designed higher in the back.
What is the benefit of a levelling kit?
The main benefit of a levelling kit is that it will level out the uneven stance and increase the ground clearance of your vehicle.
Do you need an alignment after levelling kit?
Yes, you do. Anytime anything is done to the wheels, it’s a good idea to get an alignment done by a professional.
Does a lift kit add value to the truck?
Generally speaking, a lift kit will decrease your vehicle’s value due to the modification done.
Final Thoughts
A good levelling kit will give your vehicle the elevation it needs for optimal performance. So what are you waiting for? If you liked any of the models mentioned above and have feedbacks, or have any type of general recommendations, let us know in the comment section below!
Post Comment