10 Best Bearing Puller Review and Complete Guide
Handling gears and bearings can get awfully exhausting if you don’t have the right tools. Plus, you always run the risk of damaging the surrounding machinery.
If you’re planning to avoid that from now on and be smart about the way you work, then it’s high time to consider getting a bearing puller for yourself. Along with the many benefits that this has for you, a bearing puller will also help you with other vehicle-related jobs!
Best Bearing Puller Choices
If you’re planning to get the best bearing puller for yourself, then I’m here to help you out.
The art of getting the best fit is a little daunting and can be a little intimidating if not approached the right way. I’ve been down that road, and it’s my duty to ensure that you don’t make the same mistakes that I did.
Our 10 Picks of Best Bearing Puller
Now, let’s get to the heart of things. Just below, I’ve highlighted the top ten models currently available in 2020 and have highlighted them briefly. Furthermore, I’ve also mentioned a few pros and cons as a summarizing note so that you’re better equipped to make your decision.
Without further ado, let’s get started!
1. 8MILEAKE Blind Inner Bearing Puller Hole Remover
The 8MILEAKE Blind Inner Bearing Puller Hole Remover is my premium recommendation for all of you. Here’s what you should anticipate with this model!
First of all, I’d like to mention its durable and sturdy construction. The best thing about this is that this puller is made from metal that is built to last.
I find this very helpful when working with tools that are adjusted for heavier use. Plus, it puts me at ease that the model won’t break if I’m a little too rough.
Along with the ergonomic slip-free design, you’ll also have access to a pain-free session because you won’t need to apply too much pressure.
This will make it easy to work for longer periods of time without any serious muscle aches or cramps.
Lastly, I’d like to add that this model is very easy to operate. You probably have a good idea about that till now, given the features mentioned above.
There are, nonetheless, a few downsides I’d like to highlight before we proceed.
Firstly, the puller is a little wobbly. This can make the job harder if you don’t have stable hands.
Furthermore, you’ll have to ensure that you keep it stored properly. If not, the parts might get rusty and break under serious impact.
Other than that, the 8MILEAKE Blind Inner Bearing Puller Hole Remover is as good as it gets and should definitely be on the top of your list!
- Comes equipped with all the relevant accessories
- Easy to use and get the hang of
- Comes with a heavy-duty storage case
- Offers a versatile range of services
- Improper storage can damage the structural integrity
- The puller is a little wobbly
Bottom line
I recommend the 8MILEAKE Blind Inner Bearing Puller Hole Remover to all types of users out there who are looking for the best bearing puller of 2020.
2. Orion Motor Tech 9-Way Slide Hammer Puller Set
Next up, we have the Orion Motor Tech 9-Way Slide Hammer Puller Set.
With features that include a heavy-duty tool kit, internal and external jaws, and a multi-functionality, this is my premium follow-up recommendation!
The best thing I like about this model is its internal and external jaws. What really sells is the 2/3 jaw, which is optimal for internal and external pulling jobs.
The chrome vanadium steel construction is the main reason for this model’s durability. You won’t have to worry much about this model breaking under pressure!
Furthermore, this also grants it the perfect balance of corrosion resistance, durability, and smooth operation.
Lastly, I think this review would be incomplete if I don’t highlight the grip wrench adapter and the dent puller attachment.
Optimal for sheeting metals and other pulling jobs, the quality of performance is very good and makes for a nice addition to your toolkit!
I wholeheartedly appreciate the reliability and firmness that this set operates with, which makes my pulling work so much easier.
The only issue I have with this model is that the instruction manual is a little misleading. Plus, the clamps might not work for inner bearing races.
Hence, you might need to plan and adjust accordingly if you intend to go with this model.
- Offers decent durability and long-term application
- Resistant to rust and corrosion
- Offers enough versatility to get a lot of pulling jobs done
- Comes with a blow-molded storage case
- The instruction manual is incomplete
- The clamps aren’t optimal for inner bearing races
Bottom line
For those who didn’t like the first model, the Orion Motor Tech 9-Way Slide Hammer Puller Set is a definite go and won’t disappoint!
3. OTC Differential Side Bearing Puller Set
The OTC Differential Side Bearing Puller Set is a lightweight model that you should consider if you’re planning to get something low-maintenance.
The best thing I like about this model is its simple presentation. The main reason for that is that it allows me to focus more on the job at hand and get it done in the least amount of time possible.
As far as performance is concerned, I found nothing particularly bad about this model. The OTC Differential Side Bearing Puller Set can get any type of job done that requires a puller set.
However, I’d still advise caution if you’re planning on working heavy-duty.
This model is more suited for household applications and might buckle under pressure if exposed to extreme temperatures or settings.
The only downside to this model is the factory jaw settings. There might be some jobs in which you might need to tweak the settings a little.
If you’re okay with that, then the OTC Differential Side Bearing Puller Set should be your number one pick!
- Very easy to operate and get the hang of
- Made from durable and sturdy material
- Features a heavy-duty storage case
- Might need to alter the jaw geometry for specific jobs
Bottom line
If you’re a mechanic looking for a backup kit or a homeowner, the OTC Differential Side Bearing Puller Set should be your pick.
4. PMD Products 16pc Blind Hole Pilot Bearing Puller
The PMD Products 16pc Blind Hole Pilot Bearing Puller is known for its versatility. Here’s what you should anticipate with this model.
To start off, this 16-piece puller kit features extra-large expanding collets.
The best thing about that is that it allows me to get a variety of jobs done with ease. I only need to carry one kit on me, and I’m good to go.
As far as my experience goes, this function was met with the tool kit and the ensemble that was provided.
I particularly appreciated that because it saved me trips to and fro from my work station – I got the bulk of my work done in one sitting.
The only downside that I found about the PMD Products 16pc Blind Hole Pilot Bearing Puller is that the instruction manual that comes with the model wasn’t that helpful.
If you’re planning to get the job done easily, I would recommend that you look up references and step-by-step tutorials online.
Once you’re clear with that, you’re good to go, and the PMD Products 16pc Blind Hole Pilot Bearing Puller definitely would not disappoint!
- Features a 3lb T-handle chrome slide hammer
- Comes equipped with all the relevant equipment
- Features a wide variety of collets size
- Eliminates the need to dismantle machinery
- The instruction manual is a little unclear
Bottom line
I recommend the PMD Products 16pc Blind Hole Pilot Bearing Puller to all types of users who prioritize versatility and functionality in their tool kits!
5. Shankly 5 Ton Capacity Bearing Pullers
The Shankly 5 Ton Capacity Bearing Pullers is a versatile kit that is your ultimate solution to all pulling needs. With this model, there’s much to look forward to. Let’s get started!
The first thing I’d like to address is its versatility. This puller kit can be used together with other pullers and tools, which ensures that you can get a wide range of jobs done.
Apart from making my older models useful as well, I like this bit because it ensures that I’m always equipped to tackle all types of tasks at hand.
Coming equipped with four sets of hex push puller legs and a 5-inch bar-type puller head with forcing screws, the point I mentioned above is automatically reinforced.
Lastly, let’s direct some attention to the frame and the durability of the Shankly 5 Ton Capacity Bearing Pullers.
With a rugged drop forged construction, you won’t have to worry about any type of extreme temperatures rendering this model useless.
This is a pretty handy feature if you’re looking for something sturdy and want something that can effectively handle stress.
As far as downsides are concerned, there’s one major thing I suggest you keep in mind.
The supplied clamps in this model don’t fit over bigger wheel bearings. Hence, you might need to get an extra tool for that.
Other than that, there isn’t anything considerable that I feel might make this model difficult.
- Can be easily used in combination with other pullers and tools
- The heat-treated construction can withstand extreme temperatures
- Has a versatile operation to address various pulling jobs
- Bar pullers and legs give complete job safety
- Featured clamp won’t fit over bigger wheels
- The instructions aren’t that well written
Bottom line
The Shankly 5 Ton Capacity Bearing Pullers is the best option for you if you’re looking for a kit to complement and supplement your previous kit!
Read Also: Top-rated 10 Best Tonneau Cover
6. OrionMotorTech 5-Ton-Capacity Bearing Puller
The Bearing Puller 5-Ton-Capacity Bearing Separator is a universally compatible all-in-one kit that should definitely be on your radar. Here’s what I like about this one!
Firstly, I’d like to point out this model’s durability.
With a rugged drop forged construction and heat treatment, this puller can effectively function in all types of temperatures and environments.
On top of that, this kit is a complete one. What that means that it comes packed with all the relevant hardware you’ll need to get the job done.
This will make effective and fast removal a very straightforward process and save you the hassle that is often associated with older models.
Lastly, the universal compatibility also deserves some credit. This feature has made my life so much easier!
This is also favorable because, as mentioned above, it allows me to focus more on my job rather than setting the tools right.
There aren’t any noticeable downsides to this model, to be honest. The only thing that I’ve noticed is that it isn’t suitable for the beginner user, because improper pressure application can actually damage this model.
- Heat-treated construction allows durability and strength
- Universal compatibility reduces the need for tweaking
- Designed for rugged and heavy-duty application
- Comes equipped with all the necessary hardware
- Not suitable for beginners
Bottom line
The Bearing Puller 5-Ton-Capacity Bearing Separator is a decent model to consider. Just make sure that you’re acquainted with the setup before proceeding!
7. YOTOO Bearing Pullers Set
The YOTOO Bearing Pullers Set is my best heavy-duty selection. If you’re looking for something strong and sturdy, this is your best bet.
For starters, this widely used model can be used independently or with other models. Hence, if you’re looking for an upgrade but still want to hold onto that older piece, then this is it.
I enjoy this because it allows me to customize my own toolkit and keep the best of the best.
On top of that, this is a complete kit that will ensure versatility for all types of pulling jobs. If you’re looking for the best hex push puller legs on the market, then this kit has it all.
Personally, I vouch for them due to their solid built and rigid grip in my hand.
Keeping that in mind, it’s also noteworthy that the construction of this kit is done by keeping the extreme of conditions in mind.
I never really gave much attention to the environment that this kit was put to task, because it’s make-up is exceptionally strong and built to last a long while.
There are no downsides whatsoever to the YOTOO Bearing Pullers Set. With this kit, you’re geared for optimal performance and durability.
Hence, keeping all of this mind, it’s safe to conclude that this set is one of my favorites.
- Heat-treated tools are durable and sturdy
- Features all the relevant hardware to get pulling jobs done
- Can be used separately or in conjunction with similar models
- It’s a wide range of tools allow for versatile job applications
- None
Bottom line
I recommend the YOTOO Bearing Pullers Set to all types of users out there looking for a heavy-duty kit.
8. ABN Bearing Puller
There are some cases where you don’t want a kit and want something simplistic. If you’re looking for something that falls into that category, then let me introduce you to the ABN Bearing Puller.
This practical damage-free separator is notable for applying even pressure to smoothly separate bearings and gears without any damage.
I like this feature because it reduces the subtle damage that is often done due to maintenance work, especially when the equipment isn’t suited for precision work.
On top of that, the ABN Bearing Puller has a versatile operation. You can use this model to remove bearings, pinions, pulleys, steering wheels, etc.
This range is seldom covered by models of this type, which is why this is my go-to puller if my objective is to service the whole vehicle.
Lastly, this model is very durable and designed specifically for heavy-duty applications.
Its chrome-plated steel interior with a black oxide finish ensures its resistivity to rust and corrosion.
This allows me to actually put in work and not worry about damaging the puller, something that was mostly required with the previous models by this brand.
The only downside to this model is that it isn’t really well-suited for beginner use. Plus, the manual won’t really help you get there.
Hence, I leave the ABN Bearing Puller to users who have some experience in this department and want a model that can cater to all their maintenance needs.
- Allows for versatile application all over the vehicle
- Durable for heavy-duty applications
- Advanced design features allow firm surface gripping
- Black oxide finish provides protection against rust and corrosion
- Not suitable for beginners
Bottom line
The ABN Bearing Puller is a pretty solid model to consider if you’re looking for something durable and sturdy.
Read Also: 10 Best LED Headlights Review
9. Rough Country 1307 2″ Leveling Kit
If you’re looking to give your truck the perfect blend of performance, protection, and style, then the Rough Country 1307 2″ Leveling Kit is the best pick for you.
The best thing about this model that I like is its increased ground clearance for on and off-road obstacles.
I really enjoy this feature because it actually allows me to test my vehicle and push its limits. If you’re an enthusiast like me, then you’ll definitely appreciate this feature.
This makes leveling the front and rears an appreciable task, especially because you’ll be free from the general mess that similar jobs create.
On top of that, the installation process is also pretty straightforward and doesn’t really require any technical finesse. I really appreciated this because it helped me get the job done in half the time that I actually anticipated.
The instruction manual is a good guide to go by, but to make the most out of what’s at hand, I’d suggest you look up a step-by-step tutorial of how to get the job done.
The only considerable downside that this model might have is that you might need to get a little creative to get the perfect fit.
Since each vehicle is built differently and this model isn’t vehicle-specific, you might need to tweak the bolts a little to get the job done well.
- Suitable for increased ground clearance for all type of activities
- Easy to install/don’t require any technical expertise
- Maintains a smooth factory-type ride quality
- No disassembly required for strut installation
- The instruction manual isn’t that good
- Might require a little tweaking to get the perfect fit
Bottom line
The Rough Country 1307 2″ Leveling Kit should be your top pick if you’re looking to add some variety and flavor to your vehicle!
10. DASBET 5pc Blind Hole Pilot Bearing Gear Puller
Last but not least, we have the DASBET 5pc Blind Hole Pilot Bearing Gear Puller Slide Hammer Removal Tool.
Do not let this model’s placement on the list fool you; it’s still as good as the other models. Here’s what you should anticipate.
Starting out with its construction, it’s notable to mention that this model is durable and sturdy.
The model also comes with case storage where you can effectively keep your tools. On that note, I would recommend that you clean the kit individually before storing it.
This will ensure longevity for the model and protect it from any type of structural damage.
The one major downside of this model is that it doesn’t come equipped with an instruction manual.
However, fret not. To get the most out of the DASBET, I highly recommend looking into online resources such as YouTube. They will definitely help you get the job done.
On the other hand, if you’re already acquainted with how puller kits work, then I’m sure you won’t really have to worry about this bit.
- Has good overall presentation
- Allows for convenient storage features
- Easy to travel with
- The lightweight frame is convenient to carry around
- The instruction manual isn’t that elaborative
- The toolkit is not as versatile as other models
Bottom line
If you’re looking for something lightweight and effective, then the DASBET 5pc Blind Hole Pilot Bearing Gear Puller Slide Hammer Removal Tool would do you well.
Read Also: 10 Best Power Stop Brakes Review
Things to consider when buying bearing Puller
If you’re planning to get the best model for yourself, then there are definitely a few things that you should keep in mind.
I would advise that you work with all of these unilaterally to make the most out of them. In the end, it’s entirely up to you. But I feel that it’s important to add this point in the beginning nonetheless. Here are the top things to consider!
Material
The first thing that you should look into is the material of the model that you’re choosing.
Generally speaking, it’s always a good idea to get something that is heavy-duty. Not only are they more durable, they are also less likely to be damaged or break under harsh impact.
Furthermore, heavy duty models are well suited for a wide range of vehicles.
Versatility
On that note, it’s a smart idea to get something versatile as well.
Look for a model that comes as part of a complete kit. This kit will ensure that you can work on different parts of the vehicle as well, such as the steering wheel etc.
Storage kit
A storage kit will make it convenient for you to travel with your kit.
Furthermore, it will also allow you to store your tools in a place where you know everything belongs.
If you’re a travelling mechanic or want to keep something inside your vehicle at all times, then this feature can come in handy.
However, storage kits should be considered last when it comes to picking the right model for yourself.
You should get there, yes. But get there at the end, don’t make this your first priority.
Read Also: 10 Best Jeep Foot Pegs Review
Frequently Asked Questions (FAQs)
Compiled below are the topmost asked questions by our users. This will help you get more acquainted with what these pullers have to offer!
• What is a puller tool?
A puller is a tool that is used for removing parts such as gears, pulleys, and bearings.
• How do you remove a pulley?
Though this might differ vehicle to vehicle, the general method is to use a bolt-removing tool on the bolt’s head. Slacken the bolt and after that it’s all self-explanatory.
• What is a 3 jaw puller used for?
Generally speaking, a 3 jaw puller is used for removing hard-to-remove parts.
• What is a bearing splitter?
A bearing splitter is virtually the same as the puller tool. Some manufacturers like to use alternative lingo to address their products.
• How do you get bearings out of a shaft?
This process can often be quite long and tiresome. However, the model’s instruction manual generally covers the basics so it’s best to refer to that.
• What is a blind bearing puller?
A blind bearing puller is a puller that is required to cater for internal pulling jobs.
• How many type of bearing pullers are there?
Types of bearing pullers include bearing splitter plates, two and three arm bearing pullers and internal bearing pullers.
• How do you identify bearings?
After you’ve pointed them out, you should note that the first digit or letter or combination of letters identifies the bearing type and eventually a basic variant.
Wrapping Up
A good pulling kit will make your life so much easier. If you liked any of the models mentioned above and have any type of feedback or recommendation, do let us know in the comment section below!
Post Comment